Lego Stormtrooper patrol on Hoth

Lego Stormtrooper patrol on the ice planet Hoth, Star Wars

I first thought of the idea for this photo over two years ago but you know how it goes. Other images take precedence (especially ones that don’t require as much time to set up!), you temporarily forget about it, life in general etc.  However, I found myself at a loose end one evening last week & I thought “Hey! Let’s give it a go!”

I began by taping 6 sheets of white, A4 paper together & placing them on a table. This was to create a basic white base (if you had a larger piece of paper or white foam board then obviously this would work just as well). At the back I stood two pieces of black, A4 card on their end to help create a dark backdrop (the cereal boxes were just a handy aid seeing as I was in the kitchen!) I arranged the stormtroopers on the base & stuck each of them down with a tiny piece of blu tack to prevent them from falling over mid shot. A quick scout on the internet had brought up baking powder as the most popular material to use as snow in this type of scaled down imaged. As you can see from below, you don’t need to cover the entire base. Keep checking the live view on your camera to see any bare sections that require attention. For future reference, this was two 170g packets of baking powder. A useful tip when applying the baking powder is to roughly sprinkle it into hills & shapes first, then sieve some additional powder over the top to create a fine top layer which looks more realistic.

Stormtrooopers on Hoth set up.
Set up for Stormtrooper patrol on Hoth image.

For the planet/moon (“That’s no moon!”) I took a piece of kitchen foil & loosely crumpled it into a ball before carefully unfolding it & wrapping it around a small, plastic, side plate. As I knew the top of the planet wasn’t going to be in shot I merely held it with one hand while shining a small, LED pocket torch at it with the other. This was the only light source used (the room being completely dark) although I also had a white reflector just below the camera to bounce some of the light back onto the front of the mini figures. As for camera settings, the camera was in Aperture Priority mode in order for me to choose the depth of field I wanted & the resulting exposure was 1.3 seconds. It goes without saying the camera was on a tripod. I also set the shutter release to a 10 second delay seeing as both hands were occupied operating the torch & holding the moon.

Post production was fairly brief. A slight white balance adjustment to create a cooler look. A hue/saturation tweak to the blue channel and a brightness & contrast adjustment. Finally a little sharpening to finish it all off.